Apply to the wear-resistant floor, wall, cement
Construction method traditional spraying, rolling coating
Mixing ratio, weight ratio A: B=10:1 (Construction after 5 minutes of mixing)
PU Top Coat
0102030405
Waterbased Rigid Polyurethane Surface Coat for Industrial Floor
Characteristics of the product
● High hardness, strong scratch resistance, high pollution resistance
● Make the substrate color bright, waterproof, resistant to yellowing
● Strong wear resistance, high resistance to pollution, can be repeatedly washed with water
● No radiation, green environmental protection, high pressure resistance, good ultraviolet light resistance
● Fast construction and economical cost
Product Parameters
|
Item Number |
SQM-A01B02 |
|
surface gloss |
semi-light |
|
Component |
two |
|
Pencil hardness |
≥3H |
|
5%H2SQ4 |
No change in7 day |
|
%NaOH |
No change in7 days |
|
Suggested thickness of the dry film layer |
150-200 µ m |
|
Water resistance |
No change in 30 days |
|
The substrate temperature(℃) |
15-25 |
|
Surface drying time(H) |
2 |
|
Real dry(H) |
24 |
Applications
Applicable to the floor, color sand floor, marble floor, road surface color change, etc.
laboratory, research and development room, pharmaceutical factory, parking lot, subway station, supermarket, warehouse, heavy-load industrial plant, etc
Packing
Component A (main agent) 18.2 kg Component B (curing agent) 1.8 kg
Storage
This product should be stored in a cool, dry, ventilated indoor warehouse, storage period for half a year. Safety: strictly prohibit all fire sources for bottom coating ingredients and construction site, and maintain good ventilation. Construction personnel must wear protective equipment to prevent the inhalation of paint mist and damage to the eyes and skin. Base coating splash on the skin should be immediately cleaned with soapy water, splash into the eyes, should be immediately washed with a lot of water, and then find a doctor to check.
Construction conditions
Coating temperature range 5-35℃, relative humidity below 80%, temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to paint the construction. Rain, snow, wind and sand and other severe weather, can not be painted.
Operation methods and requirements
Coating temperature range 5-35℃, relative humidity below 80%, temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to paint the construction. Rain, snow, wind and sand and other severe weather, can not be painted.