Single square meter dosage ≥1.3kg
Sports Track And Field
0102030405
Running Track EPDM Playground One-Component Polyurethane Adhesive
Characteristics of the product
● Cured at room temperature.
● Excellent physical and chemical properties, good adhesion.
● Convenient construction, high efficiency, one construction can meet the design thickness requirements.
Product Parameters
|
Test item |
Index |
|
|
Physical indicators |
NCO content（%） |
5.5±0.2 |
|
Appearance（20℃) |
Pale yellow viscous liquid |
|
|
Operation time（min/25℃) |
60-90min |
|
|
Usage temperature(℃) |
Normal temperature |
|
|
Surface drying time（h/25℃) |
6-12 |
|
|
Solidification time（h/25℃) |
24-48 |
|
|
Physical indicators |
Viscosity（MPa.S/30℃） |
2500±200 |
|
Tensile strength（MPa，20% rubber content EPDM granules ） |
≥0.4 |
|
|
Elongation at break（%，20% rubber content EPDM granules） |
≥40 |
|
Applications
Applicable to the floor, color sand floor, marble floor, road surface color change, etc.
laboratory, research and development room, pharmaceutical factory, parking lot, subway station, supermarket, warehouse, heavy-load industrial plant, etc
Packing
200kgs/drum
Storage
Sealed storage of coatings in dry, cool, and well ventilated conditions, avoiding sunlight and rain, and keeping away from sources of fire.
Construction conditions
1）Base surface requirements: The concrete base surface should be cleaned, repaired flat, and polished to a certain roughness. Ensure that the concrete curing is completed, the strength reaches C25 or above, and the moisture content is less than 8%. After processing the base surface, the next process should be carried out as soon as possible.
2）Environmental temperature and humidity requirements: The environmental temperature at the construction site should be above 5 ℃, and construction can only be carried out when the relative humidity is less than 85%
3）Ventilation conditions: Ventilation should be maintained during construction.
Operation methods and requirements
a. Select materials.
b. Recommended ratio of single square dosage: ≥0.9 kg glue, 1 ~ 1.1 kg 0.5-2mm size granules, 0.3 ~ 0.4 kg rubber powder, 0.06 kg color paste.
c. The granules size is recommended by 0.5-2mm. When the glue temperature is low in winter, the viscosity problem is solved by heating the glue to ensure the covering and bond strength. First the glue and color paste fully stir evenly, and then add granules and red rubber powder fully stir evenly, combined with the site situation can be appropriate to add an appropriate amount of environmental protection diluent to adjust the construction viscosity, can not be adjusted too thin, to prevent the material from penetrating into the particles and excessive atomization when spraying, the granules surface of the slurry packaging less resulting in future granules.
d. After mixing evenly, spray once in both directions.